[ICOM] Icom 756 Pro ll select band operation

[Tom Norris]

>Mark,
>
>I agree with the previous poster who recommended to
>double check the default ANT selection for each band.
>
>I don't think it is a coincidence that the 14, 21, and
>28 Mhz bands are the only ones that are OK. These are
>probably grouped together using one of the antenna
>connections for a tri-band yagi, for instance, and
>leaving the other bands on the opposite antenna port.
>
>I agree with you, it's probably something simple. If
>all else fails, you could always reset the radio to
>all default settings using the procedure in the
>manual. This will remove all customization data
>previously entered.
>
>73 and good luck,
>
>Frank W3UHF
>

He seemed to indicate that neither the RX lite nor the
red "TX" indicator change when on the dead bands as
if they are not dead because an antenna is not connected,
but that they are not actually functioning at all. Sounds like
it is not a case of simply not having the antenna connected.

Tom