[ICOM] 756Pro Alinement

Clif Holland clif at avvid.com
Tue May 25 09:10:07 EDT 2004


He said the sound not the bandscope and Yes it should be the same.

Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

www.avvid.com

1-800-214-5779
972-870-0630 (Local)
----- Original Message ----- 
From: "Ron Lowrance, K4SX" <k4sx at akorn.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, May 25, 2004 7:52 AM
Subject: Re: [ICOM] 756Pro Alinement


> When tuning the WWV signals on 5, 10, and 15MHZ the typical mode is AM.
You
> will notice that the AM signal is centered on the center line of your
> display.  When you change to LSB the signal will shift one direction and
the
> opposite for USB.  If I understand your question correctly and your radio
is
> behaving in the manner just described, so your radio is operating
properly.
> If I missed your point please send me an email.
>
> K4SX
> Ron Lowrance
> Cumming, GA
>
>
>
>
>
> ----- Original Message ----- 
> From: "Ken" <k9fv at highstream.net>
> To: <icom at mailman.qth.net>
> Sent: Tuesday, May 25, 2004 8:42 AM
> Subject: [ICOM] 756Pro Alinement
>
>
> Hi all,
>
> I have a 756Pro that seems to be out of alignment.  If I tune in 10.000mhz
> on AM, then switch to USB then LSB, shouldn't the sound be the same on
both
> LSB and USB?  It is not.  I've checked at 10, 15, and 20mhz on the WWV
freqs
> and USB/LSB tone is off on all bands, but amount of tone off varies per
> band.
>
> I looked at the ICOM alignment procedure in the manual, but was told by a
> couple of folks that would not do the alignment I needed.  Is this true?
OR
> would this  procedure work?
>
> I would like to find a repair should within a couple of hundred miles of
> Mobile, AL so I could perhaps take the rig in one morning, and pick it up
> that afternoon if at all possible.
>
> Thanks for any info/help anyone can provide.
> Ken H>
> K9FV
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>




More information about the Icom mailing list