[ICOM] ICOM AH-2a for trade.

[Michael P. Olbrisch]

As you may have read below, I am successfully using it.  However, the AH-4
is made for the 706.  The AH-2 with controller works (don't need the
controller on the 706), but is a waste for the 706 and might be needed by
someone else.  I would trade the AH-2 for an AH-4.  That way someone needing
the controller (which is stored away unused here) and tuner would have it.

If someone wants to trade, good deal.  If not, as I said, it is working
fine.

Mike.  KD9KC
El Paso, TX.

> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]On Behalf Of JJ
> Sent: Wednesday, May 19, 2004 2:37 AM
> To: ICOM Reflector
> Subject: Re: [ICOM] ICOM AH-2a for trade.
>
>
> I do have an interest....
> What are you asking for it ?
>
> 73,
> Jon
> KD5SFA
> ----- Original Message -----
> From: "Michael P. Olbrisch" <mike2004 at elp.rr.com>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Tuesday, May 18, 2004 8:27 PM
> Subject: RE: [ICOM] ICOM AH-2a for trade.
>
>
> >
> > Yea, but I had a triple-thought in trading the AH-2 for an AH-4.
> >
> > #1. I don't need it anymore, and I know others have a need for the
> > controller.
> >
> > #2.  The AH-4 does 6m, which is something the AH-2 will not.
> >
> > The AH-4 is smaller.  It will fit better with my 35ft
> fiberglass vertical.
> >
> > Otherwise, yes it is useable, because it is on my 706 right
> now.  In fact,
> > the AH-3 is nothing more than the AH-2 sans controller.
> Other than the
> 6m,
> > it is fine as it is.
> >
> > I guess no-one is interested, so I will list it elsewhere.
> >
> > Thanks.
> >
> > Mike.  KD9KC
> > El Paso, TX.
> >
> > > -----Original Message-----
> > > From: icom-bounces at mailman.qth.net
> > > [mailto:icom-bounces at mailman.qth.net]On Behalf Of Gary Fiber
> > > Sent: Wednesday, May 19, 2004 12:53 AM
> > > To: ICOM Reflector
> > > Subject: Re: [ICOM] ICOM AH-2a for trade.
> > >
> > >
> > > Mike,
> > >
> > > You do know the AH-2 tuner will work with the 706, just plug
> > > it into the back into the tuner connector and put the control
> > > box away until you need it.
> > >
> > > Gary K8IZ