[ICOM] CI-V question

[Dave Bernstein]

Thanks for checking, Gary. I went ahead and implemented "set VFO B
frequency" using the "set sub to main" command, but if you ever do run
across the 775 command documentation, please send it my way -- it'd be
nice to eliminate the special case.

    73,

        Dave, AA6YQ

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Gary Fiber
Sent: Monday, June 21, 2004 14:47
To: ICOM Reflector
Subject: Re: [ICOM] CI-V question


Dave,

I finally got over to Icom today. I looked in the 775 radio file and did

not find any other command set for it.
I remember the main/sub button only did a vfo swap. I also looked in the

746 file since I thought we had received a more detailed command set for

that radio but did not find that either.

Gary K8IZ

At 06:42 PM 6/1/2004, you wrote:
>While we're on the topic of the CI-V bus, Gary, what are the CI-V 
>commands for selecting VFO A and VFO B on an IC-775? These commands are

>not documented on page 20 of the 775 manual. The VFO or Main/Sub 
>selection commands used in other dual-receive transceivers (781, 756, 
>756 pro, etc) don't work in the IC-775. I know for a fact that such 
>commands exist because I spent several hours of trial and error finding

>them when I first got the radio, and used them for years. 
>Unfortunately, I no longer have either the command information or an 
>IC-775 with which to rediscover it. Can you help? Thanks...

Gary Fiber K8IZ
GROL PG-19-6691
Washington State Resident


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/