[ICOM] CT-17 Level Converter - software

[D C Macdonald]

All well and good, but how does one gain
access to the http://www.qsl.net website?

It doesn't let me in and a note to the owner
hasn't gotten me a reply either, even though
I have contributed!

Come to think of it, I have not been able to
access it since my donation was acknowledged.


Mac, K2GKK/5




----Original Message Follows----
From: "Dave Bernstein" <aa6yq at ambersoft.com>
Reply-To: ICOM Reflector <icom at mailman.qth.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Subject: RE: [ICOM] CT-17 Level Converter - software
Date: Fri, 11 Jun 2004 22:43:37 -0400

Commander is free, and available via www.qsl.net/dxlab .

     73,

         Dave, AA6YQ

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Jim Miller
Sent: Friday, June 11, 2004 22:40
To: ICOM Reflector
Subject: [ICOM] CT-17 Level Converter - software


I have these radios and the computer but have never connected them -
what do you use for software?

Tnx es 73, de Jim KG0KP

----- Original Message -----
From: "Randy Brothers" <k9or at comcast.net>
To: <icom at mailman.qth.net>
Sent: Friday, June 11, 2004 7:51 PM
Subject: [ICOM] RE: Question about the CT-17 Level Converter


 > I would also endorse the K1NU converter/cable - have had a variety of
 > interfaces, and never a problem with this one with a 765, 746 and a
 > 706.
 >
 > 73 Randy K9OR
 >
 >
 > ----
 > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
 > Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
 > http://www.qsl.net/icom/
 >


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/