[ICOM] Question about the CT-17 Level Converter

Carl Moreschi n4py at earthlink.net
Fri Jun 4 10:02:25 EDT 2004


There are many third party ICOM level converters that are much less
expensive than the CT-17.  Do an internet search on "ICOM CIV".  One that is
only $26 shows up at

http://n9zle.tripod.com/cable.htm

I have no affiliation with the above company.

73,

Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Dave Edwards" <kd2e at comcast.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, June 04, 2004 12:45 PM
Subject: Re: [ICOM] Question about the CT-17 Level Converter


> Bob... I have a 756Pro that I bought a long time ago.
> I already had the CT-17 that I used with other Icoms.
> I kept my eyes open and found one a flea market for 25 bucks.
> If I had to do it again, I would get one of the aftermarket cables..even
> cheaper!!
> ...Dave
> ----- Original Message -----
> From: "Bob Scott" <w4zy at bobandpenny.us>
> To: <icom at mailman.qth.net>
> Sent: Friday, June 04, 2004 8:27 AM
> Subject: [ICOM] Question about the CT-17 Level Converter
>
>
> > I am thinking of purchasing an Icom IC-756-PRO II and want to control it
> via
> > computer.  I believe that requires me to get the CT-17.  Is that
correct?
> > Is this the only option if I wish to computer control the transeiver.  I
> > have a Yaesu level converter, a FIF-232C that I need to dig out, but I
> would
> > be surprised if it did the same thing.  My FT-1000MP Mark V Field has a
> > build in 232 port, so it has not been an issue before.  Any
> advice/guidance
> > is welcomed.
> > Thanks and 73,
> >
> > Bob
> > W4ZY
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/



More information about the Icom mailing list