[ICOM] Re IC765 No Transmit

[Jim Isbell]

I didn't see the original post so may be barking up the wrong tree. 
 BUT.......if you have no transmit in SSB only then it could be what 
took my 725 out.  The element in the mike blew out and there was no 
audio into the balanced modulator to modulate the signal, so no signal. 
 It took a $1.99 electret mike element from Radio Shack to fix it.

W9MWS at aol.com wrote:

>Thanks George!  I'll take a look at Q14 in the morning.
>
>73, Mike W9MWS
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>  
>