[ICOM] CI-V commands for determing the state of Split and DualWatch

[John L Merrill]

It's still the same.

-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Dave Bernstein
Sent: Saturday, July 31, 2004 5:20 PM
To: 'ICOM Reflector'
Subject: [ICOM] CI-V commands for determing the state of Split and
DualWatch


The previous generation of Icom transceivers provides CI-V commands for
enabling or disabling the Split and DualWatch functions, but no means of
"reading" the state of these functions. I assumed that this oversight
had been corrected in the expanded CI-V command sets introduced with the
746 Pro, 756 Pro, 756 Pro II, and 7800, but on reviewing the
documentation, I see commands to send/read the state of Quick Split,
Split Lock, and Quick DualWatch, but no means of reading the state of
Split or Dual Watch. Am I overlooking the obvious, or is the
documentation in error? Do these transceivers provide CI-V commands for
reading the state of Split and DualWatch? If so, I'd appreciate a
pointer to the information, or the information itself.

I've already checked Ekki DF4OR's CI-V site, without success.

    73,

       Dave, AA6YQ 

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/