[ICOM] 706 MKII G Separation Cable

[saad mahaini]

Buy one male, and one female 8 pin mini din connectors.  Cut the cable and
terminate each end with one of the mini din connectors.  Female on the radio
side, and male on the remote head side.  Pin for pin.  Now, you can buy a
mac computer extension cable with male-female connectors. These have 8 pin
mini din connectors on them.  All 8 pins are wired thru, and the shield is
connected to the metal sleeve.  Get a good quality cable with a good shield,
etc.  These come in 6 ft, 8 ft., 10 etc.  I needed a longer cable for my 706
mobile installation and that's what I did and it works very well. 73 Saad
N5FF       

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Jon W0AMT
Sent: Friday, July 16, 2004 11:40 PM
To: ICOM Reflector
Subject: Re: [ICOM] 706 MKII G Separation Cable

Good Luck.  As you probably already know they are proprietary connectors.

I have seen them go for close to retail on the bay, no deals there.

AES has the 16' Separation cable for $79.99.  Expensive but what are you
going
to do.

73, Jon
W0AMT

----- Original Message ----- 
From: "Al & Cathy Emery" <acemery at adelphia.net>
To: <icom at mailman.qth.net>
Sent: Friday, July 16, 2004 11:24 PM
Subject: [ICOM] 706 MKII G Separation Cable


> I need the longest separation cable for my 706 MKII G.  I don't need the
> whole separation kit, just the cable.  Where can I get one without
> paying $50 to $60?
>
> TIA,
>
> Al
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/