[ICOM] 765 output

[NABEREZNY JOHN]

Thanks Tony, I was confused for a second as to who sent what, guess another senior moment. Appreciate the response. 
              73, John WE2F
  ----- Original Message ----- 
  From: Tony Hwang<mailto:dragon40 at shaw.ca> 
  To: ICOM Reflector<mailto:icom at mailman.qth.net> 
  Sent: Thursday, August 26, 2004 11:58 PM
  Subject: Re: [ICOM] 765 output


  George, W5YR wrote:

  >John, Q14 has blown. It feeds the RF output stages via miniature coax.
  >Replace it with a 2N2222 until Icom can send you the proper transistor for
  >replacement. There are a number of mods that reduce the likelihood of
  >blowing Q14. Icom should be able to give you the info.
  >
  >73, George W5YR
  >Fairview, TX
  >w5yr at att.net
  >http://www.w5yr.com
  >
  >
  >----- Original Message ----- 
  >From: "NABEREZNY JOHN" <John_WE2F at msn.com<mailto:John_WE2F at msn.com>>
  >To: <icom at mailman.qth.net<mailto:icom at mailman.qth.net>>
  >Sent: Thursday, August 26, 2004 4:17 PM
  >Subject: [ICOM] 765 output
  >
  >
  >Hi Folks,
  >   I lost output on my 765 in all modes and all bands. I have collector
  >voltage, but it appears as though  no drive. Suggestions needed.
  >   thanks, John WE2F
  >
  >----
  >Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net<mailto:icom-owner at mailman.qth.net>
  >Icom Users Net: Sundays, 1700Z, 14.316 MHz
  >Icom FAQ: http://www.qsl.net/icom/<http://www.qsl.net/icom/>
  >
  >----
  >Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net<mailto:icom-owner at mailman.qth.net>
  >Icom Users Net: Sundays, 1700Z, 14.316 MHz
  >Icom FAQ: http://www.qsl.net/icom/<http://www.qsl.net/icom/>
  >
  >  
  >
  Hi,
  I had same problem.
  73,
  Tony, VE6CGX
  ----
  Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net<mailto:icom-owner at mailman.qth.net>
  Icom Users Net: Sundays, 1700Z, 14.316 MHz
  Icom FAQ: http://www.qsl.net/icom/<http://www.qsl.net/icom/>