[ICOM] amplifier keying

[Adam Farson]

Hi John,

The 756Pro manual and the earlier edition of the Pro2 manual (without the
(2) suffix) stated 2A. This was corrected in the current Pro2 manual with
the (2) suffix.

The data sheet for the OMR-109F relay used in many Icom HF radios is linked
from this page:

http://www.qsl.net/icom/auxrelay.html

Cheers for now, 73,
Adam VA7OJ/AB4OJ


-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of John Fleming
Sent: Tuesday, August 17, 2004 12:42
To: ICOM Reflector
Subject: Re: [ICOM] amplifier keying


> 2. Read Page 18 of your Pro2 User Manual
>
> The specifications for the internal SEND relay are 16 V DC 0.5 A. If this
> level is exceeded, a large external relay (or external keying buffer) must
> be used.

And some of the manuals incorrectly say 5A, right?  ;-)  I can't remember
now if that was the PRO or PROII...

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


Scanned by WinProxy
http://www.Ositis.com/