[ICOM] IC-2SAT help needed

[Mike Miller]

http://www.cqham.ru/ftp/dw.php?sh_ic2sat.zip

On 10 Aug 2004 at 22:31, Reed Park wrote:

> 
> Hi Group
> 
> Buddy of mine has a problem with his IC-2SAT handheld. It works
> if external DC is applied via the DC jack. radio does NOT work
> with either the battery pack or the internal batteries. He has had
> both packs rebuilt by a local battery place (no problem with packs
> they have done in the past). Both packs check out AOK, but the
> radio does not work with either of them. I am looking for a schematic
> of the board located at the bottom of the radio, just beneath the
> internal battery pack. Any ideas where I might find it on the internet ?
> 
> I have checked a few MODS sites with no luck, and have done a google
> search with also no luck. I would be very willing to pay for any copy charges
> etc. if a hard copy were all that is available.
> 
> 7 3
> Reed
> 
> --
> 
> 
> Looking for information on
> 
>      Marconi SMR-3
>      Marconi MSL-5 and
>      Northern Electric R8119A receivers of WW 2.
> 
>      ARROW Research (Avro CF-105)
>      Reed Park
>      252 Gauvin Road
>      Dieppe, New Brunswick
>      Canada E1A1M1
> 
>      Amateur Radio V E 1 N U
>      WW II, # 19 SET user
>      Paraset replica builder and owner of a real one.
> 
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/