[ICOM] 756ProII and PW1

[John Fleming]

Anecdotally, I can report I've done it many ways over the last couple of
years, and everything's still working FB!  I wouldn't worry about the order
at all.  I've had the radio on and later turned on the amp for various
reasons - There's no problem with that.

Now, when you're setting up the communication between the two for the first
time, there's a prescribed order to that in the manual.  73 - John, WA9ALS

----- Original Message ----- 
From: "Jerry Keller" <k3bz at arrl.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, August 06, 2004 5:03 PM
Subject: Re: [ICOM] 756ProII and PW1


> Now that's what I thought too... but if I already have the radio on, do I
shut it down before
> turning on the amp?
>
> Jerry K3BZ
>
>
> ----- Original Message ----- 
> From: "John Germanos" <wb9pnu at swbell.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Friday, August 06, 2004 3:59 PM
> Subject: Re: [ICOM] 756ProII and PW1
>
>
> > I turn on PW-1 first then radio. I shut down PW-1 first then 756pro
and/or
> > 775dsp. I asked Icom and that is what they told me was the best way.
Why, I
> > don't remember.
> >
> > John WB9PNU
> >
> > ----- Original Message ----- 
> > From: "Jerry Keller" <k3bz at arrl.net>
> > To: "(Reflector) ICOM" <icom at mailman.qth.net>
> > Sent: Friday, August 06, 2004 8:30 AM
> > Subject: [ICOM] 756ProII and PW1
> >
> >
> > > When shutting down, which is it best to shut down first, the 756ProII
or
> > the PW-1?? Or does it make
> > > a difference?
> > >
> > > 73,  Jerry K3BZ
> > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > > Icom FAQ: http://www.qsl.net/icom/
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>