[ICOM] DualWatch not working: 775DSP

[Adam Farson]

Hi Mike,

The Dual Watch balance potentiometer may have gone open at one end, or the
"B" synthesiser may have failed. You can check the pot by enabling Dual
Watch, rotating the pot and listening for a reduction of sensitivity in the
"A" channel. Then, you can check the "A" and "B" synthesisers by enabling
Split, and checking that the radio transmits on the "B" frequency - or by
switching back and forth between "A" and "B" whilst receiving.

Cheers for now, 73,
Adam VA7OJ/AB4OJ


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Mike Bragassa-Canadian Consolidated Oil Ltd
Sent: 02 August 2004 11:40
To: icom at mailman.qth.net
Subject: [ICOM] DualWatch not working: 775DSP

Any reason my 775DSP DualWatch would quit working? It is set to "on".

Mike Bragassa, K5UO
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/