[Icom] Icom 2000 Molex Connector

[David G. Nagel]

Mike Drum wrote:
> 
> Wow...The jury is in! It's two fused lines
> for sure!
> 
> Thanks for sharing the stories. I had no
> idea something like that could happen.
> I think I might even check my ground
> line this weekend!
> 
> Thanks again guy's for taking the time to help.
> 
> Mike N2QAC
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> 
I have two fuses in each line on my mobile installation. One fuse on 
each line at the radio and one fuse at the battery. This is in addition 
to the Icom line fuses that come with the radio. The fuses at the 
battery are to protect the wires if the insulation should fail and a 
wire short out.
Since my IC 706mkii is remoted from the read of my van I installed a 
power cable intended for a 500watt audio amp. This wire is extremely 
large in both diameter and wire count. I haven't measured the voltage 
drop but it should be very low.

Davd WD9BDZ