[Icom] IC-229H

[Rick Robinson]

I don't have the web address as I have a new computer and haven't
transferred stuff over yet but do a search for MTS or Scott Malcolm and you
will find a section on his web site which address common problems with some
rigs and your very problem is mentioned there. GL, Rick.
----- Original Message -----
From: "Dave Haney" <w3sj@ptd.net>
To: "icom reflector" <icom@mailman.qth.net>
Sent: Thursday, May 22, 2003 3:00 PM
Subject: [Icom] IC-229H


> I have an old (1992) IC-229H. Upon checking the SWR, I happened to notice
> that the power output was 5 watts no matter which power setting (high/low)
> was being used. Any advice or similar experiences would be helpful.
>
> Also have a slightly less old 281H which works fine but the display lights
> burned out about 2 minutes after the warranty expired. Any thought?
>
> tnx es 73
> Dave Haney
> W3SJ
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>