[Icom] C-IV to multiple radios
Adam Farson
[email protected]
Sun, 11 May 2003 10:26:00 -0700
Hi Roy,
Ah yes, but then there are those hams (not I; I am retired) who put that
time to work for them by doing consulting work at $100/hr. and up, so that
they can buy expensive, reliable toys which allow them to spend their
non-earning "leisure" time behind the wheel, so to speak, rather than under
the hood!
Cheers for now, 73,
Adam VA7OJ/AB4OJ
-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Roy Sakabu
Sent: Sunday, May 11, 2003 07:38
To: '[email protected]'
Subject: [Icom] C-IV to multiple radios
I'll show you one. Take any CT-17 or clone and instead of plugging the
phone plug into one radio, plug it into a Y-Cable where barrels and tips are
all connected together. If you can understand that concept, you'll
understand that the C-IV system sits idle at +5V and any rig on the party
line simply pulls that line low during serial communications and all other
rigs listen in on those commands to see if they should QSY.
Try it. You'll like it.
The reason that many "cheap" (like me) hams don't want to spend one penny
more than needed is that its a HOBBY and every penny you save can be spent
elsewhere on the hobby. It is also a pastime where you don't mind spending
an entire weekend fixing up a $50 radio you found for 25 cents at a garage
sale (that is, when you have the time).
73
Roy
AD6ZU
-----Original Message-----
From: JOE
To: [email protected]
Sent: 5/11/03 5:53 AM
Subject: RE: [Icom] EXPENSIVE accessories!!!
I've have yet to see a homebrew CT-17 clone that can connect to more
than
one radio. I thought that the advantage to the CT-17 was that you can
connect more than one radio to your computer and address them
individually. Am I missing something?
73, Joe, K1ike
At 07:44 PM 5/10/2003 -0700, you wrote:
> I've made a couple of versions of
>a homebrew CT-17, the cheapest of which cost me only $8.
All outgoing email scanned with Norton AntiVirus2003.
----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed. To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html ---
----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/