[Icom] icom interference

Mon, 24 Mar 2003 20:19:07 -0500

Tnx tony well i kinda lead u all astray as there is the noise when the
buzzer is operating and then it quits when the buzzer quits but the noise
comes back abt an s-7 when the engine is started... when i take the ant off
the the radio goes quiet .. so the noise is comming tru the ant... sounds
like i need some grounding... me thinks... but still need help.. tnx to all
----- Original Message -----
From: "Tony Hwang" <[email protected]>
To: <[email protected]>
Sent: Sunday, March 23, 2003 6:36 PM
Subject: Re: [Icom] icom interference


> Hi,
> Sounds like buzzer is electronics type. Try a cap across the leads going
> to the buzzer for a starter.
> Is it coming thru antenna or power cord? With antenna removed, you get
> the QRN?
> Worst comes, you just disconnect them(quiet them)
> GL es 73,
> Tony, VE6CGX
>
> Donald Frazier wrote:
>
> >Hi to all have an icom 706 11g that i have instaled in my toyota
motorhome and getting lots of interference when i turn the key on... It is
comming from the door buzzer the key buzzer and it doesn't seem to make any
difference if i have the coach running or not, and i have the power cord
hooked up directly to the battery,is there anything i can buy or put in the
leed to cut this noise down.. would like any help i can get on this tnx much
ka8cve
> >
> >
> >--- StripMime Report -- processed MIME parts ---
> >multipart/alternative
> >  text/plain (text body -- kept)
> >  text/html
> >The reason this message is shown is because the post was in HTML
> >or had an attachment.  Attachments are not allowed.  To learn how
> >to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> >----
> >Your Moderator: Dick Flanagan W6OLD, [email protected]
> >Icom Users Net: Sundays, 1700Z, 14.315 MHz
> >Icom FAQ: http://www.qsl.net/icom/
> >
> >
> >
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>