[Icom] RE: RE: 706MKIIG - No Output
Vladimir Karamitrov
[email protected]
Mon, 17 Mar 2003 11:14:55 +0200
Hi Art ,
Try this :
1.Connect dummy load directly to the PA unit - to confirm that it is OK.
2.Check FILTER UNIT - (control voltage to the relays )
regards,
73 ,
Vlado
ZS6MG
From: "Arthur Prewitt" <[email protected]>
To: <[email protected]>
Subject: Re: [Icom] RE: 706MKIIG - No Output
Date: Sun, 16 Mar 2003 20:11:51 -0700
Reply-To: [email protected]
.Hi All,
I have a IC-706MKIIG. No output 160 through 6 Meters ok on 2 and 70cm. .
Draws a lot of current on xmit but no output.
Is this a common failure mode? Any words of wisdom.
Art