[Icom] ICOM IC-740 info

[GGLL]

	I tried that url also, this is what I've obtained: 

ICOM IC-740 ~~~~~~~~~~~~~~~~~ EXPD. RF 1- Remove the power and antenna.
2- Remove the screws and open the radio. 3- Locate RF
board. 4- CUT white resistor jumper located between D-31 and "C" wire.
5- Reset the microprocessor. 6- Reassemble the radio.
�����������������������������������ͻ � KB2LJJ BBS RADIO MODS BATABASE �
All the MODS are captured by packet. �����������ͻ
���������������ͼ This BBS taks no responsability or �����������ͼ
���������������ͻ liability for any damege resulting � KB2LJJ @
KB2LJJ.NJ.USA.NA � from this modification.
�����������������������������������ͼ 73s John kb2ljj SySoP

Maybe this can help you, Reed, if you read between nonsense
characters..  :)

Best regards
Guillermo - LU8EYW.

Reed Park escribi�:
> 
> "Frank A. Ellis" wrote:
> 
> > Reed, here is the mod as described on the KB2LJJ Mods website:
> >
> > http://www.kb2ljj.com/data/icom/ic-740
> >
> > 73, Frank W3UHF
> > www.icomclassic.com
> 
> Hi Frank.
> 
> First of all, many thanks for the info, however, I am unable
> to access the above url. When I try to click on the mods
> it comes back with the message " to view the radio mods
> directory you must have a user name and password"
> 
> 7 3
> Reed
> 
> --
> 
> ARROW Research  (Avro CF-105)
> Reed Park
> 252 Gauvin Road
> Dieppe, New Brunswick
> Canada    E1A1M1
> 
> Amateur Radio  V E 1 N U
> WW II, # 19 SET user
> Paraset replica builder
> 
>   Outgoing mail is certified Virus Free.
>   Checked by AVG anti-virus system
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/