[Icom] RE: Cabinet Screws
Frank A. Ellis
[email protected]
Wed, 05 Mar 2003 07:33:34 -0500
Hello All,
The "typical" case screws used in the older ICOM HF equipment (730, 740,
745, 751A, etc.) are M3x6 (metric size M3, 6 mm long), black brass.
I have also used these on the 271, 471, 275, 1271A, AT-500, IC-2KL/IC-2KLPS,
and other types of ICOM gear. They should suit many more types of ICOM gear
as well.
I will post the ICOM Part number later when I get home from work. ICOM
America sells these for $0.13 each and they are plentiful.
73, Frank W3UHF
www.icomclassic.com
>From: Mark <[email protected]>
>Reply-To: [email protected]
>To: [email protected]
>Subject: Re: [Icom] RE: Cabinet Screws
>Date: Tue, 04 Mar 2003 19:31:34 -0800
>
>Having gone to these suggested sites, which I appreciate .. which screws (I
>know there is more than one used in ICOM gear) are we looking for? What
>..
>is/are the specs? 73 --- Mark .. AA6DX
>
>----- Original Message -----
>From: "David" <[email protected]>
>To: <[email protected]>
>Sent: Tuesday, March 04, 2003 7:26 PM
>Subject: Re: [Icom] RE: Cabinet Screws
>
>
> > Thanks Joe. I made a copy and will check out there web sites in the next
> > couple of days...Thanks for your help. Dave VA7DG
> > ----- Original Message -----
> > From: <[email protected]>
> > To: <[email protected]>
> > Sent: Monday, March 03, 2003 5:35 AM
> > Subject: [Icom] RE: Cabinet Screws
> >
> >
> > > Dave and others on the list,
> > >
> > > Here are two sources for metric screws in the US
> > >
> > > Micro Fasteners
> > > 24 Cokesbury Road, Suite 2
> > > Lebanon, NJ 08833
> > > Phone 800-892-6917 or 908-236-8120
> > > Fax 908-236-8721
> > > E-Mail [email protected]
> > > Website: http://www.microfasteners.com
> > >
> > > McMaster-Carr Supply Company
> > > P.O. Box 440
> > > New Brunswick, NJ 08903-0440
> > > Sales Desk and Customer Service:
> > > Phone: 732-329-3200
> > > Fax: 732-329-3772
> > > E-mail: [email protected]
> > > Website: http://www.mcmaster.com
> > >
> > > I have purchased from both sources over the years and have found them
>to
> > be friendly and efficient. McMaster-Carr is a major industrial supplier
>with
> > several warehouses across the US. Their web pages are an education in
> > itself.
> > >
> > > 73,
> > >
> > > Joe Walc, K2JAW
> > >
> > > >I am looking for a supplier other than Icom that can supply the small
> > >black metric screws that are used to fasten the covers on Icom radios.
> > >Thanks for the help....Dave VA7DG<<
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/
_________________________________________________________________
The new MSN 8: advanced junk mail protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail