[Icom] 10.7 MHz IF output DC block

[Shadow ~ Gary]

Hi....

The TV-7000 & TV-7100 unit is connected to the 10.7 Mc IF, Discriminator
output via a Diode and a cap I think it was a .01 mf.
If the TV-5000 has a 10.7 input,  then it should work fine.

I have used some old, ugly and big commercial units that were 10.7 Mc
and they worked fine on my R-7000's.

Gary
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Brian Short wrote:

> A question on the R-8500 mailing list is relevant
> here too, I guess.  The same applies to the R-7000
> and the R-7100.
>
> Anyway, since the TV-R7100 is no longer available
> from Icom, the question comes up about whether
> the AOR TV-5000 adapter is compatible.  It is, but...
>
> This is not rocket science, but below is the answer:
>
> As promised, here is my solution to connecting the Icom
> IC-R8500 with the AOR TV-5000 video adapter.
>
>       http://www.k7on.com/scan-swl/r8500/index.htm
>
> Incidenty, I have an Icom IC-R7100 from an Estate.
> It was never used and still has the plastic on front.
> At this time, I don't really need both the R-8500 and
> the R-7100.
>
> --
> See my web page: http://www.k7on.com
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

You can only... Steal from the Rich.
                   Because the poor, do not have anything worth
taking....