[Icom] AT 150

Fri, 4 Jul 2003 23:17:08 -0500

Hi Walt,

Thanks, nope the manual was missing from the carton.

Sure would appreciate it.

73

        William J. Diamond (Bill)
        Rogers, Arkansas USA
        [email protected]

        Ham Radio Operator WR�T

 Please Visit My Icom Radio Page At

 http://pages.sbcglobal.net/wjdiamond/index.html

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Walter S. Szachara
Sent: Friday, July 04, 2003 8:55 PM
To: [email protected]
Subject: Re: [Icom] AT 150

Hi Bill...

Do you have the manual?  I can shoot you a file if you do not.  Let me
know...

Regards,

Walt, W2OKF

----- Original Message -----
From: "William J Diamond" <[email protected]>
To: "Icom@Mailman. Qth. Net" <[email protected]>
Sent: Friday, July 04, 2003 4:40 PM
Subject: [Icom] AT 150

> Hi Folks,
>
> Well, I borrowed a cable to hook the AT 150 to the IC 735 and I am sure
the
> tuner is not working right.
>
> With 50 watts into the tuner, it puts 4 watts out to a dummy load after
the
> tuner has tuned but not very long. Adjusting the presets for max power
out
> seems to work but it is still about 25 watts less out than is going into
> the tuner.
>
> The manual also supposedly fell out of the box during shipping also, as
did
> the interface cable. Yea right !!!!!
>
> Any ideas?
>
>
>         William J. Diamond (Bill)
>         Rogers, Arkansas USA
>         [email protected]
>
>         Ham Radio Operator WR�T
>
>  Please Visit My Icom Radio Page At
>
>  http://pages.sbcglobal.net/wjdiamond/index.html
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/