[Icom] ICOM 756pro

Sat, 25 Jan 2003 11:30:24 -0800

ME!  I was playing around (why read the instructions?) and it went dead.
Have you noticed the little arrow head that will move out on the digetal 
display with the squelch being adjusted?  That is what twigged me.  So I 
leave that turned way down now.

Chris opr VE7HCB

At 09:07 AM 2003-01-25 -0500, you wrote:
>Yes, the squelch can set right on the threshold such that it works on
>some frequency ranges and not others, due to the background noise being
>higher or lower. The noise level may be high enough to open the squelch
>in one range but too low to open the squelch in another range, with the
>same squelch setting. Guess who had a "bad" receiver once in a limited
>range of frequencies on the radio and how I "fixed" it? :-)
>
>73, Ray  W2EC
>
>Tony Hwang wrote:
>
>  > Hi,
>  > May I ask squelch can be set to work on certain frequency range on this
>  > radio? That must be quite a thing.
>  > 73,
>  > Tony, VE6CGX
>  >
>  > Roland Guidry - WA5CHX wrote:
>  >
>  >> Try the simple things first. Check your Squelch!
>  >>
>  >> Roland
>  >>
>  >> ----- Original Message -----
>  >> From: "AL" <[email protected]>
>  >> To: <[email protected]>
>  >> Sent: Friday, January 24, 2003 11:06 PM
>  >> Subject: [Icom] ICOM 756pro
>  >>
>  >>
>  >>
>  >>
>  >>> My 756pro stopped receiving from 2 to 6 mhz. Transmit is OK.  All other
>  >>>
>  >>
>  >> frequencies work.  Anyone else had this problem? I have the service
>  >> manual
>  >> on CD and am trying to figure out where to start looking..    AL K3ROJ
>  >>
>  >>
>  >>> --- StripMime Report -- processed MIME parts ---
>  >>> multipart/alternative
>  >>>  text/plain (text body -- kept)
>  >>>  text/html
>  >>> The reason this message is shown is because the post was in HTML
>  >>> or had an attachment.  Attachments are not allowed.  To learn how
>  >>> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>  >>> ----
>  >>> Your Moderator: Dick Flanagan W6OLD, [email protected]
>  >>> Icom Users Net: Sundays, 1700Z, 14.315 MHz
>  >>> Icom FAQ: http://www.qsl.net/icom/
>  >>>
>  >>>
>  >>
>  >>
>  >>
>  >> ----
>  >> Your Moderator: Dick Flanagan W6OLD, [email protected]
>  >> Icom Users Net: Sundays, 1700Z, 14.315 MHz
>  >> Icom FAQ: http://www.qsl.net/icom/
>  >>
>  >>
>  >>
>  >
>  >
>  >
>  > --- StripMime Report -- processed MIME parts ---
>  > multipart/alternative
>  >  text/plain (text body -- kept)
>  >  text/html
>  > The reason this message is shown is because the post was in HTML
>  > or had an attachment.  Attachments are not allowed.  To learn how
>  > to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>  > ----
>  > Your Moderator: Dick Flanagan W6OLD, [email protected]
>  > Icom Users Net: Sundays, 1700Z, 14.315 MHz
>  > Icom FAQ: http://www.qsl.net/icom/
>  >
>
>
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/