[Icom] ICOM 756pro

Sat, 25 Jan 2003 09:07:49 -0500

Yes, the squelch can set right on the threshold such that it works on
some frequency ranges and not others, due to the background noise being
higher or lower. The noise level may be high enough to open the squelch
in one range but too low to open the squelch in another range, with the
same squelch setting. Guess who had a "bad" receiver once in a limited
range of frequencies on the radio and how I "fixed" it? :-)

73, Ray  W2EC

Tony Hwang wrote:

  > Hi,
  > May I ask squelch can be set to work on certain frequency range on this
  > radio? That must be quite a thing.
  > 73,
  > Tony, VE6CGX
  >
  > Roland Guidry - WA5CHX wrote:
  >
  >> Try the simple things first. Check your Squelch!
  >>
  >> Roland
  >>
  >> ----- Original Message -----
  >> From: "AL" <[email protected]>
  >> To: <[email protected]>
  >> Sent: Friday, January 24, 2003 11:06 PM
  >> Subject: [Icom] ICOM 756pro
  >>
  >>
  >>
  >>
  >>> My 756pro stopped receiving from 2 to 6 mhz. Transmit is OK.  All 
other
  >>>
  >>
  >> frequencies work.  Anyone else had this problem? I have the service
  >> manual
  >> on CD and am trying to figure out where to start looking..    AL K3ROJ
  >>
  >>
  >>> --- StripMime Report -- processed MIME parts ---
  >>> multipart/alternative
  >>>  text/plain (text body -- kept)
  >>>  text/html
  >>> The reason this message is shown is because the post was in HTML
  >>> or had an attachment.  Attachments are not allowed.  To learn how
  >>> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
  >>> ----
  >>> Your Moderator: Dick Flanagan W6OLD, [email protected]
  >>> Icom Users Net: Sundays, 1700Z, 14.315 MHz
  >>> Icom FAQ: http://www.qsl.net/icom/
  >>>
  >>>
  >>
  >>
  >>
  >> ----
  >> Your Moderator: Dick Flanagan W6OLD, [email protected]
  >> Icom Users Net: Sundays, 1700Z, 14.315 MHz
  >> Icom FAQ: http://www.qsl.net/icom/
  >>
  >>
  >>
  >
  >
  >
  > --- StripMime Report -- processed MIME parts ---
  > multipart/alternative
  >  text/plain (text body -- kept)
  >  text/html
  > The reason this message is shown is because the post was in HTML
  > or had an attachment.  Attachments are not allowed.  To learn how
  > to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
  > ----
  > Your Moderator: Dick Flanagan W6OLD, [email protected]
  > Icom Users Net: Sundays, 1700Z, 14.315 MHz
  > Icom FAQ: http://www.qsl.net/icom/
  >