[Icom] Ic-756ProII Problems

[icom@mailman.qth.net]

Roland,

Are ALL the plug in's to the PRO2 unplugged?  Speaker, DIN plugs (ACC1 or 
ACC2), AMP Relay, Mic, Key, Antenna 1, Antenna 2, Etc.?  I have a problem in 
CW or SSB with mine when keying the amp or even when bypassing the amp.  With 
VOX on, the radio feeds back into the DIN (ACC1 or 2) SEND line with a VOX 
sensitivity setting at or above 53%.  This results in the radio going in and 
out of transmit continually.  Setting it at 52% or below stops the feedback.  
Turning off the VOX or unplugging my DIN (ACC1 or 2) to AMP cable also stops 
the feedback. 

I don't have a clue whether this will help, however, I thot I'd pass the info 
FWIW.

Good luck with the problem.

73, Mike W9MWS


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---