[Icom] Icom 756 Audio Buzz

Wed, 08 Jan 2003 16:12:30 -0500

Basically, yes.  Check that out first to be certain that isn't the problem.  BTW, I am
using Astron supplies here.  I initially has an Icom PS85 supply on it but it was a major
piece of junk.  I *finally* got Icom to take it back and send me the $$$.

GL.

73,  Tom - WA2BPE

[email protected] wrote:

> I'm using an Astron 50 amp, and I never thought to take a look at it. I
> believe the circuit board need to be tightened once in a while. Is this
> what you were thinking?
>
> Kevin
>
>
>                       WA2BPE
>                       <[email protected]       To:       [email protected]
>                       et>                      cc:
>                       Sent by:                 Subject:  Re: [Icom] Icom 756 Audio Buzz
>                       icom-admin@mailman
>                       .qth.net
>
>
>                       01/08/2003 09:55
>                       AM
>                       Please respond to
>                       icom
>
>
>
> What are you using for a power supply?
>
> Tom - WA2BPE
>
> [email protected] wrote:
>
> > Hi Gang,
> >
> >    I have an original 756 with the slight audio buzz. I have tightened
> all
> >    the circuit boards, but I can still hear it a little in the monitor.
> Any
> >    other ideas?
> >
> >    Thanks & 73,
> >    Kevin N0KQ
> >
> >    [email protected]
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/