[Icom] RE: 751A Icom Problem

[Victor's Computers Ltd]

Steve I have not had this problem before, The A frame is about 300 feet away
and the ham was using a TS50 and a Dipole. I used the Switch on top (Pri-amp
switch) of the 751A to cut down the signal if he got near me on the band.
And the rig was working ok till the rain storm blew thru.
The Coax Switch is a MFJ 8 position Switch Brand new from the UK. .

Will have to wait till Jim ZK1JD comes back from New Zealand to do some
tests with another rig

When ZK1XYL was operating from this Qth they worked SSB and someone else was
on my KT34A working CW no problems, But then they were using there own rig
on my antenna a Icom 706.

Static noise is on 10 to 20 meters at around 57 to 59 no signals coming thru
on these bands with the Beam.

Thanks for the info

Regards

Victor ZK1CG and ZK1USA



k0sd@juno.com wrote:

>Victor,
>   I have 2 towers up, about 100 ft apart.   I can run the 751 on one,
>and a 756Pro or 706 on the other one, no problem.   I lived about 500 ft
>from a friend in Honduras for a couple years, he'd run a KW, I never knew
>he was on unless we got within 20 khz of each other.   Doubt someone down
>on the beach got it.
>
>73's de Stephen, K0SD in NC
>
>***************************
>