[Icom] Icom 775DSP

[Larry]

I have a 765 but I've found that the pins are fairly standard. Grounding=20
pin 3 of ACC1 will put the radio into transmit mode.

73 - Larry W=D8NFU
larry_w@comcast.net


At 09:57 AM 8/2/2003 +1200, you wrote:

>Hi gang, I want to connect a foot switch to my Icom 775DSP but am unsure of
>the way to go.
>
>I did try it connected to the TR Control Jack, on the back panel but it did
>not work.  Anyway I believe that particular jack point is for amp
>connections :-)
>
>Looking more closely at the handbook, should I be using pin 3 of the
>Accessory sockets, ACC1 and 2?
>
>10 is dead, 12 is dead and 15 is not much better - and this could last for
>years :-(
>
>73 Ian ZL1IW
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.500 / Virus Database: 298 - Release Date: 10/07/2003
>
>----
>Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/