[Icom] 761 Help

Fri, 11 Apr 2003 12:02:41 -0500

Hi Cliff,

Thanks.   From the amount of previous soldering on the RF board in the area
of the diodes someone has been in there before searching for the problem.

At this point, I am about to replace all the associated diodes with the
correct ones from Icom as I have no way to tell if the right diodes were
even installed by whomever.

I suspect that several people have tried to fix this one.

73 to all

        William J. Diamond (Bill)
        Rogers, Arkansas USA
        [email protected]

        Ham Radio Operator WR�T
      Flying The Flag Long Before
            It Was Popular
   Please Visit My New Icom Radio Page

 http://pages.sbcglobal.net/wjdiamond/index.html

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Clif
Sent: Friday, April 11, 2003 8:24 AM
To: [email protected]
Subject: Re: [Icom] 761 Help

The schematic is correct, figure out why yours is wrong.

Clif Holland,  KA5IPF
AVVid
Authorized Kenwood and Icom Service
www.avvid.com
1-800-214-5779
972-554-6801
----- Original Message -----
From: "wjdiamond" <[email protected]>
To: "Icom@Mailman. Qth. Net" <[email protected]>
Sent: Thursday, April 10, 2003 10:52 PM
Subject: [Icom] 761 Help

> Hi Gang,
>
> Now I am really perplexed.  The reading that I get on each side of Diode
D
> 47 are exactly opposite of what they should be.
>
> According to Icom and the manual the cathode side should read 9.4 RX and
> 9.7 TX
>
> The Anode side should be 8.8 RX and 13.8 TX
>
> Mine reads the exact opposite I guess the black band is still the cathode
> today as in many years ago. I always considered the Anode side to look
like
> an arrow on the schematic.
>
> This is a weird diode also it is a M 1204 and I cannot find a cross for
it
> anywhere.
>
> What am I missing??
>
> Thanks
>
>         William J. Diamond (Bill)
>         Rogers, Arkansas USA
>         [email protected]
>
>         Ham Radio Operator WR�T
>       Flying The Flag Long Before
>             It Was Popular
>    Please Visit My New Icom Radio Page
>
>  http://pages.sbcglobal.net/wjdiamond/index.html
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/