[Icom] IC-910H questions

Thu, 3 Apr 2003 09:03:06 US/Eastern

If you get one of these radios, and you have a chance, check the output power 
before you buy. Mine is about - 25% of spec. In other words spec calls for 100W 
mine does about 75-80W on 2M and 55-60w on 70Cm where it should be 75W. I'm 
getting ready to send mine back to see if Icom can get it up to spec.

Julio, W4HY 

> Johnny,
> From what I have read this is a very low sales volume radio and most recent
> new ones are maybe in the 2100 range, my best guess. And thats after more
> than a year of sales.
> 73 W4AWI  (I posed original question not copied here)
> 
> Message: 3
> From: "Siu Johnny" <[email protected]>
> To: <[email protected]>
> Subject: Re: [Icom] IC-910H questions
> Date: Thu, 3 Apr 2003 09:34:40 +0800
> Reply-To: [email protected]
> 
> From my past experience with ICOM rigs, I always look for S/N after 25xx or
> even better 30xx.  I do not know whether this also applies to the IC910H
> case.
> 
> I shall be pleased to hear views.
> 
> 73
> 
> 
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/