[Icom] Icom 765 with AH-4

Tue, 24 Sep 2002 04:42:22 -0700 (PDT)

Hi Brian. The 756 series of radios all have the 4 pin molex connector for
an external tuner. The PROll manual indicates that it works with the
AH-4/AH-3 tuners. The available adaptor kit will do as you indicate, but
maybe consider an SGC auto tuner, works with ANY radio in case you aren't
married to ICOM, needs no adapters, costs about the same or less than the
ICOM units, and wants only 12 VDC and the RF signal. Mine works perfectly.
Good luck, Ken

--- Brian Carling <[email protected]> wrote:
> There IS an adapter kit that I have seen on the web.
> 
> They claim it will let the AH-4 work with ANY rig.
> 
> The AH-4 tuner works perfectly with my IC-746 and has actually
> revolutionized my 
> hamming!
> 
> Probably would work with the 756 too. Is there a 4 pin in-line molex
> connector on 
> the back of the 756?
> 
> On 22 Sep 2002 at 16:30, Donald Gieszelmann wrote:
> 
> > Hello 
> > 
> > Can the Icom AH-4 tuner be used with the Icom 765 ?
> > 
> > Thanks
> > 
> > Don   w0dg
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> 
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/

__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com