[Icom] IC-27H Display Repair

[Ken Brown]

Paul,

The voice module may be the only practical answer.  I have one
for one of the radios, (not the ones that have the bad displays)
that I could use to set the freq.  The voice was never very good
but would be good enough for this.

Ken, N5KUK

Paul Hammer/KA6CHJ wrote:
> 
>    Ken and Group
> 
>    Icom has been out of the displays for several years. AES
> has had the voice module for the 27,37 and 47 rigs.I seem to
> remember$10. I have purchased several for my radios. That
> will solve the problem. The voice module gives freq off set
> & etc.
> 
>     Paul
> 
> Ken Brown wrote:
> 
> > Has anyone had any luck repairing the LED display on a IC-27H
> > 2 meter radio.  I have one radio that had been used for years
> > on packet (turned on 24x7) and now so many segments are missing
> > in the display that it is hard to determine the frequency.  On
> > another radio some segments are starting to go.
> >