[Icom] DC Power Cable

Fri, 6 Sep 2002 14:16:27 -0400

Hi Bert,

The difference in part number could be a number of things, ie: different =
manufacturer, different length or even different gauge. Icom uses the =
same pin out for all there radios. at least since the 725.

73 de
Fred (W1SKU, VK2GSX) ,Pam (N8YVT, VK2GSW), Phoebe and Jaclyn

E-mail: [email protected]
Web Pages: HTTP://members.firststep.net/fredpam
CCA Member # 00793
CRA Member # 1498
E-mail: [email protected]
E-mail: [email protected]
Life Member of RAST (Thailand)
Member of the ARRL
  ----- Original Message -----=20
  From: [email protected]=20
  To: [email protected]=20
  Sent: Friday, September 06, 2002 1:53 PM
  Subject: [Icom] DC Power Cable

  It is said the only stupid question is the question that isn't asked
  just prior to "smoking" an expensive radio so here goes.
  I have  a DC Power Cable for an ICOM 735.I am looking to use it with =
my
  ICOM 706MKIIG.
  I have checked and double checked the polarity of the socket on the =
706
  and have done the same with the polarity of the end of the 735 cable.I
  am convinced they are the same.
  I looked up the part numbers for a 706 cable as well as a 735 cable =
and
  they are different
  What am I missing?

  Thanks...Bert W1DFU

  ----
  Your Moderator: Dick Flanagan W6OLD, [email protected]
  Icom FAQ: http://www.qsl.net/icom/
  ...

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---