[Icom] Code Warrior Jr.

Tue, 3 Sep 2002 00:41:34 -0500

Ed

Look at the key and be sure that the contacts are in the proper position - I
bet the contacts have turned and are shorting against the block - The screws
for the code warrior are really too short and the wire ends and lugs
sometimes let the blocks that the screws go into move and allow the blocks
to get out of position - there should be a contact post on the lever that
moves and on the block that is supposed to be stationary and they need to
meet properly - they must face each other - Let me know if that is not the
problem

The plug usually uses the tip for dots the next for dahs and the biggest
part for ground - but you probably do not have that problem - touch the
wires to the contacts and test it before trying to install them permanently

Good Luck
Sorry you had the trouble
George
W4LT

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Tony Hwang
Sent: Monday, September 02, 2002 10:39 PM
To: [email protected]
Subject: Re: [Icom] Code Warrior Jr.

Hi,
Three wires, one is common ground, one for dot and one for dash contact.
You're permanently shorting dash wire to ground at the moment.
GL es 73,
Tony, VE6CGX

Ed wrote:

>I am trying to use a Vibroplex Code Warrior Jr. with my IC 736. All I can
get is dahs. The plug that I bought with it has red, white, and blue wires.
The diagram for wiring on the key has ground, black and white on the back of
the key. Probably just a matter of getting the right wires in place but does
any body know the quick answer? TIA
>ED YEARY W4TEY
>325 CUMBERLAND DRIVE
>HARROGATE, TN. 37752-6942
>
>
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>  text/plain (text body -- kept)
>  text/html
>The reason this message is shown is because the post was in HTML
>or had an attachment. Attachments are not allowed.
>Please post in Plain-Text only.---
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom FAQ: http://www.qsl.net/icom/
>
>
>

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom FAQ: http://www.qsl.net/icom/