[Icom] Re: Low pass filter

Fri, 25 Oct 2002 22:21:17 -0700

hi Bud,
Brian got back to me.  so I've got one coming.
Thanks,
Ken

-------------------
Kenneth E.  Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
Voice: (303) 684-0037
Fax:  (303) 776-5088
E-mail: [email protected]
	  [email protected]
	  [email protected]
ALPCA #8339
ARRL-LM
-------------------

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Bud Garside
Sent: Friday, October 25, 2002 08:42
To: [email protected]
Subject: Re: [Icom] Re: Low pass filter

I have one if this one is gone, contact me if you need it, 73 Bud.

On Fri, 25 Oct 2002 09:19:03 -0700 "Ken Kinyon" <[email protected]> writes:
> Hi Brian,
> If you still have it, I'll buy it.  if so, how much for shipping  
> and how
> would like to be paid.
> 73,
> Ken W7TS
> 
> -------------------
> Kenneth E.  Kinyon
> 34 Princeton Circle
> Longmont, CO 80503-2106
> Voice: (303) 684-0037
> Fax:  (303) 776-5088
> E-mail: [email protected]
> 	  [email protected]
> 	  [email protected]
> ALPCA #8339
> ARRL-LM
> -------------------
> 
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]]On
> Behalf Of Brian Carling
> Sent: Friday, October 25, 2002 07:37
> To: [email protected]
> Subject: Re: [Icom] Re: Low pass filter
> 
> 
> I have a Drake KW low pass filter for sale here that is good all the 
> way up
> to 6
> meters. $30.00 if anyone would like it.
> 
> Brian, AF4K
> 
> On 25 Oct 2002 at 7:10, joseph duerbusch wrote:
> 
> > I don't want to beat this thread to death, but since the gentleman 
> was
> > using a Icom IC-706 there is a gentle reminder.
> >
> > Low Pass filters tend to cut-off about 40MHZ.  So if you are going 
> to
> > or want to use the 6 meter and you have to either get a lowpass 
> filter
> > that cuts-off higher like the Drake TV-5200 that cuts-off after 
> 52MHZ
> > or put the lowpass filter in the line to the lowband antennas and 
> not
> > to the 6 meter antenna.
> >
> > The easy way to check a lowpass filter is to hook it to a 
> dummyload
> > and the other end to a MFJ-249 analyzer.  The SWR will be low 
> until
> > you get to the cut-off freq and then will go sky high.
> >
> > Hope this helps.
> >
> > Joe K0BX
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> 
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/