[Icom] PW-1, 756pro, 738 problems.FIXED!! thanks...

Wed, 23 Oct 2002 18:29:39 -0600

Hi,
It is a matter of getting free fish all the time or learning how to fish.
I some times REALLY wonder specially when 1X2 or 2X1 call holders ask
questionable questions.
73,
Tony, VE6CGX

WL7M wrote:

> Reading Matt's statement below tells me all I need to know about 
> someone making "dumb statements".  Let's "think friendly", rather than 
> insult someone for asking for help.
>
> WL7M
>
> At 04:01 PM 23-10-2002, Matt Erickson wrote:
>
>> An in-depth reading of the operations manual would have told you what 
>> you needed to know, but then it is "easier" to just ask dumb questions.
>>
>> At 06:21 PM 10/23/02 -0500, you wrote:
>>
>>> I didn't realize there were 2 alc settings on the rear of the amp.
>>> All is well and kicking here now ....thanks guys....Steve
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: Harry Tankin <[email protected]>
>>> Date: Wed, 23 Oct 2002 18:57:22 -0400
>>> To: [email protected]
>>> Subject: Re: [Icom] PW-1, 756pro, 738 problems....
>>>
>>>
>>> > Steve,
>>> >
>>> > Did you adjust the ALC on the PW1 to accommodate the 738?  If not, 
>>> give
>>> > that a try.
>>> >
>>> > Harry
>>> >
>>> >
>>> >
>>> > ----- Original Message -----
>>> > From: Steve Narducci <[email protected]>
>>> > Date: Wednesday, October 23, 2002 6:36 pm
>>> > Subject: [Icom] PW-1, 756pro, 738 problems....
>>> >
>>> > > I have had my pw-1 married to my pro for several months and just
>>> > > got my new opc cable to hook up the 738.  I did a complete
>>> > > reseting of the pw-1 and did the 2 rig setting as shown in the
>>> > > manual.  My pro works fine with the amp and all is well, the 738
>>> > > appeared to be fine and it is now married to the amp and follows
>>> > > bands tunes and all. However when i activate the amp, my power is
>>> > > low and delayed with the 738.  Watching the output of the 738 is
>>> > > only 10 watts, and there is a delay of the power going into the
>>> > > pw1 (if I let it set for 2 seconds, there is no delay).  When I
>>> > > turn the amp off, no problems, full 100 watts out.
>>> > > Both rigs are set to 9600 baud, the civ address is set to 54h on
>>> > > the 738.  Am I doing something wrong?  Thank you...Steve
>>> > > --
>>> > > __________________________________________________________
>>> > > Sign-up for your own FREE Personalized E-mail at Mail.com
>>> > > http://www.mail.com/?sr=signup
>>> > >
>>> > > ----
>>> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
>>> > > Icom Users Net: Sundays, 1700Z, 14.315 MHz
>>> > > Icom FAQ: http://www.qsl.net/icom/
>>> > >
>>> >
>>> > ----
>>> > Your Moderator: Dick Flanagan W6OLD, [email protected]
>>> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
>>> > Icom FAQ: http://www.qsl.net/icom/
>>> >
>>> >
>>>
>>> -- 
>>> __________________________________________________________
>>> Sign-up for your own FREE Personalized E-mail at Mail.com
>>> http://www.mail.com/?sr=signup
>>>
>>> ----
>>> Your Moderator: Dick Flanagan W6OLD, [email protected]
>>> Icom Users Net: Sundays, 1700Z, 14.315 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>
>>
>> ----
>> Your Moderator: Dick Flanagan W6OLD, [email protected]
>> Icom Users Net: Sundays, 1700Z, 14.315 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>