[Icom] PW-1, 756pro, 738 problems.FIXED!! thanks...

Matt Erickson [email protected]
Wed, 23 Oct 2002 19:01:26 -0500


An in-depth reading of the operations manual would have told you what you 
needed to know, but then it is "easier" to just ask dumb questions.

At 06:21 PM 10/23/02 -0500, you wrote:
>I didn't realize there were 2 alc settings on the rear of the amp.
>All is well and kicking here now ....thanks guys....Steve
>
>
>
>----- Original Message -----
>From: Harry Tankin <[email protected]>
>Date: Wed, 23 Oct 2002 18:57:22 -0400
>To: [email protected]
>Subject: Re: [Icom] PW-1, 756pro, 738 problems....
>
>
> > Steve,
> >
> > Did you adjust the ALC on the PW1 to accommodate the 738?  If not, give
> > that a try.
> >
> > Harry
> >
> >
> >
> > ----- Original Message -----
> > From: Steve Narducci <[email protected]>
> > Date: Wednesday, October 23, 2002 6:36 pm
> > Subject: [Icom] PW-1, 756pro, 738 problems....
> >
> > > I have had my pw-1 married to my pro for several months and just
> > > got my new opc cable to hook up the 738.  I did a complete
> > > reseting of the pw-1 and did the 2 rig setting as shown in the
> > > manual.  My pro works fine with the amp and all is well, the 738
> > > appeared to be fine and it is now married to the amp and follows
> > > bands tunes and all. However when i activate the amp, my power is
> > > low and delayed with the 738.  Watching the output of the 738 is
> > > only 10 watts, and there is a delay of the power going into the
> > > pw1 (if I let it set for 2 seconds, there is no delay).  When I
> > > turn the amp off, no problems, full 100 watts out.
> > > Both rigs are set to 9600 baud, the civ address is set to 54h on
> > > the 738.  Am I doing something wrong?  Thank you...Steve
> > > --
> > > __________________________________________________________
> > > Sign-up for your own FREE Personalized E-mail at Mail.com
> > > http://www.mail.com/?sr=signup
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
>
>--
>__________________________________________________________
>Sign-up for your own FREE Personalized E-mail at Mail.com
>http://www.mail.com/?sr=signup
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/