[Icom] IC-706MARKIIG and SB-200 Linear

Tue, 1 Oct 2002 09:02:06 -0400

Hello,
This mod may be useful.  Check the keying voltage on the SB-200.
http://w3.one.net/~jackg/Modifications/ic706.html

Ron
----- Original Message -----
From: "WA9ALS - John" <[email protected]>
To: <[email protected]>
Sent: Tuesday, October 01, 2002 7:48 AM
Subject: Re: [Icom] IC-706MARKIIG and SB-200 Linear

> Do you have a manual?  That shows where to get the key signal on the ACC.
> MFJ has the connectors.  You also should use a keying interface to protect
> the 706.
>
> ----- Original Message -----
> From: "Greg Winters" <[email protected]>
> To: <[email protected]>
> Sent: Monday, September 30, 2002 12:56 PM
> Subject: [Icom] IC-706MARKIIG and SB-200 Linear
>
>
> >
> > I have a question regarding using my old Health SB-200 linear with my
new
> IC-706MARKIIG. I've had this linear for many years and installed the
Harbach
> mods including the soft key module. I used it with my Alinco DX-70T for
> quite a while. However, unlike the Alinco and the other rigs that I have
> owned, the ICOM dos not have a direct jack to key the linear upon
transmit.
> I think that it mist be taken from some of the pins on either the 6 pin or
> ACC jacks on the rear panel. Does anyone know how to do this and where to
> find the 6 pin or ACC plugs? Thank you.
> >
> > __________________________________________________________________
> > The NEW Netscape 7.0 browser is now available. Upgrade now!
> http://channels.netscape.com/ns/browsers/download.jsp
> >
> > Get your own FREE, personal Netscape Mail account today at
> http://webmail.netscape.com/
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>