[Icom] IC 756Pro, PW1 and CT-17

Sat, 30 Nov 2002 13:54:30 -0700

LogWindows works fine with polling off.
Regards, Ken  W7TS

-------------------
Kenneth E.  Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
Voice: (303) 684-0037
Fax:  (303) 776-5088
E-mail: [email protected]
	  [email protected]
	  [email protected]
ALPCA #8339
ARRL-LM
-------------------

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Mike Mellinger WA0SXV
Sent: Saturday, November 30, 2002 13:30
To: [email protected]
Subject: RE: [Icom] IC 756Pro, PW1 and CT-17

I just tested and neither DX4WIN nor Writelog will correctly read
frequency if their polling is turned off -- event though the PRO is
correctly broadcasting as shown by the PW-1 following.  Would be nice,
though.

73,
Mike WA0SXV

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Dave, AA6YQ
Sent: Saturday, November 30, 2002 12:40
To: [email protected]
Subject: RE: [Icom] IC 756Pro, PW1 and CT-17

If your transceiver's "CI-V Transceive" parameter is set to "on", then
the
transceiver will broadcast its current frequency and mode anytime they
change due to either front-panel action or due to a directive received
from
a logging or rig-control program. That being the case, it should not be
necessary for either your logging program or the PW-1 to poll; disabling
polling on either one would eliminate the "clashes" you occasionally
encounter.

    73,

        Dave, AA6YQ

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/