[Icom] Help PW-1 wont put out

[Adam Farson]

Hi Phil,

it sounds as if either one of the MRF150 power devices in the PA stage has
failed, or the output signal path is open (due to a relay not operating).
Are you getting normal DC voltage and current readings, and is the PW-1
control panel displaying any alarm indications? At what drive level does the
PW-1 trip?

Best 73,
Adam, VA7OJ/AB4OJ
North Vancouver, BC, Canada
http://www.qsl.net/ab4oj/
Icom FAQ site:
http://www.qsl.net/icom/