[Icom] remote control

Tue, 19 Nov 2002 07:05:55 -0800

Her is a $10.00 solution to the remote control 

Here are instructions and the source for a circuit board. Also the parts
can be purchased from http://www.jameco.com/ 

This link needs to be all on one line:
http://www.seed-solutions.com/gregordy/Amateur%20Radio/Experimentation/C
IVInterface.htm#Introduction
This link needs to be all on one line: 

THIS CIRCUIT IS BASED ON THE CIRCUIT IN THE HANDBOOK 
ARRL HB 00 Fig 22.80

Description: The CI-V interface with RTS to PTT is based on the circuit
in the 2000 Handbook Fig 22.80 See
http://www.plicht.de/ekki/civ/civtoc.html for more details. Circuit uses
MAX232 (available from FAR Circuits for $5.00) 78L05, and 7417.

Randy
AC7NJ

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Bill Conkling
Sent: Monday, November 18, 2002 8:12 PM
To: [email protected]
Subject: [Icom] remote control

I just bought a used but clean 735 transceiver.  I am looking to
interface it with my PC.  Where can I find information on how to do
this?  It appears to need only a two conductor cable.  But I suspect
it also requires some sort of electronic interface to accomplish this.

Thanks

Bill  (KG4TFF)
Wmsbg, VA

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/