[Icom] IC-PCR1000

[Matt Donohoe]

Hi Guys,

I've done something pretty bad, connected power to the IC-PCR1000 the wrong
way around, I had the current limiter on and it was only for a few secs but
it would seem now as tho the regulators arent producing an output. I opened
up the unit and found the TA7805 and TA7808 regulators.. I know that its
pretty standard, center pin GND and the heatsink bit is a ground too, but
both the input & output pins appear to read no voltage...

I thought I'd post here because there's "hopefully" somebody who's done
something equally as dumb..

Thanks
Matt Donohoe