[Icom] Query...

Sat, 30 Mar 2002 10:52:54 -0600

Mike:

All modules for the IC-900 are the same as those for the IC-901 
with the exception of the two meter and 450 Mhz modules.  In 
the IC-901, these two modules are integrated in the radio. 

I would assume that they are of similar design and construction, 
but there are apparent mechanical and electrical differences. 
I have never had a problem using an IC-900 module on my 
IC-901 radio. 

Each of the modules consume about 20 plus pages in 
the Service Manual.  It might be possible to copy this material. 
It requires oversize pages for the diagrams and schematics. 

I will contact you privately about this. 

I hope this is helpful. 

Regards, 

Micheal Salem 

On Sat, 30 Mar 2002 13:47:46 -0000 "Michael P. Olbrisch"
<[email protected]> writes:
> 
> 
> > -----Original Message-----
> > From: [email protected] 
> [mailto:[email protected]]On
> > Behalf Of [email protected]
> > Sent: Saturday, March 30, 2002 7:32 AM
> > To: [email protected]
> > Subject: Re: [Icom] Query...
> > 
> > 
> > Mike:
> > 
> > There is a Service Manual for the IC-900 which provides service 
> > information for the IC-900 modules.   I do not know if it is 
> > still available from Icom. 
> 
> Are the modules the same?
> 
> > I have an IC-901with both the SSB modules and the R/91 
> > wideband receiver module.  Did you get the manual from 
> > Icom?  I have the IC-900 service manual and may want to 
> > get the IC-901 manual. 
> 
> I got it thru R&L Electronics.  http://randl.com/   As far as
> I know, it was the last one left at closeout price.  Dunno if
> ICOM still has them.
> 
> I did get an offer for data on the 1200 MHz module.  Still need
> the 28, 50, and 220 units.
> 
> Mike.

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.