[Icom] ref; KAM to PRO II

Fri, 29 Mar 2002 09:45:11 -0500

The pin numbers you list appear to be correct, HOWEVER,

 you want to use FSK (which IS pin 5) on the KAM, NOT
TRANSMIT AUDIO (which is pin 1 on the KAM.

Since your note says pin 5 , TRANSMIT AUDIO I am not sure if
you have the KAM wired right or not.

Hope this helps.

Duane Budd
[email protected]
Johnson City, TN

**All outgoing Email is screened by Norton Antivirus**

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On
Behalf Of William F. Beyer Jr.
Sent: Friday, March 29, 2002 9:19 AM
To: [email protected]
Subject: [Icom] ref; KAM to PRO II

Have cable wired up from KAM to Radio
KAM Plus (HF Radio):                 IC-756ProII (ACC1):

Pin 5 Transmit audio (FSK) --->   Pin 1 RTTY keying

Pin 2 Ground ------------------->    Pin 2 Ground (GND)

Pin 3 Push-to-Talk ------------->   Pin 3 PTT

Pin 6 Receive audio ----------->    Pin 5 AF (AF detector
output)

REC RTTY fine, but when I key for RTTY, to send, just get
solid tone.
NO diddle?

Running DX4WIN software.

Had it working fine with YAESU MP, went from 4 pins to 8
pins DIN.
What is my error?
Thanks for your help.

--
*See you in the pileups!

William/N2WB

n2wb at arrl dot net

Unless we stand for something,
we shall fall for anything.
                        --  Peter Marshall  --

*This email is intended only to be read or used by the
addressee.
It is confidential and may contain legally privileged
information.
If you are not the addressee indicated in this message, or
responsible for delivery of the message to such person,
you may not read, copy or deliver this message to anyone,
and you should destroy this message and kindly notify the
sender
by reply email.
Confidentiality and legal privilege are not waived or lost
by
reason of mistaken delivery to you.

----
Your Moderator: Dick Flanagan W6OLD,
[email protected]
Icom FAQ: http://www.qsl.net/icom/