[Icom] Quick question...is there a Pro/Pro II reflector?

Mon, 25 Mar 2002 20:18:46 -0500

Then why are so many people having a problem frying relays with no offense
intended. The rating a got for the Pro II and most Icom HF is 16V @ 200 mA
DC??? Still a little shaky. Thank you, Steve..

----- Original Message -----
From: "Larry Benko" <[email protected]>
To: <[email protected]>
Sent: Monday, March 25, 2002 6:55 PM
Subject: Re: [Icom] Quick question...is there a Pro/Pro II reflector?

> Duane,
>
> I don't believe it.  There is no way that any reed relay
> that as you claim handles 13.8V at 1A would not handle
> 25V at 7mA which is 7/1000 the amount of cuurnt and only
> 2 times the voltage.  You do as you wish but I used my
> 756PRO with an Alpha 99 (same keying specs as the 91b)
> for nearly 1000 contacts, full qsk, at 35WPM and never
> any relay problems.  That is probably 100,000 chances for
> the relay to fail.  Remember that the 25V and 7mA are
> non-inductive loads.
>
> 73,
> Larry Benko, W0QE
>
>
> Duane Budd wrote:
> >
> > "The answer is 25v 7mA.  Piece of cake for the ProII relay
> > or for that
> > matter any relay."
> >
> > Well, maybe NOT. Here is what I got from Icom Tech support
> > when I asked that question:
> >
> > The rating is 16 votla/2 amps....
> > This means you can run a max of 2 amps or 16 volts, but not
> > both.....
> > Generaly 13.8 volts at 1 amp.
> >
> > Gerd
> > www.icomamerica.com
> >
> > -----Original Message-----
> > From: Duane Budd [mailto:[email protected]]
> > Posted At: Sunday, February 17, 2002 11:14 AM
> > Posted To: Amateur
> > Conversation: IC-756PRO
> > Subject: IC-756PRO
> >
> > I have been told that the manual is wrong with respect to
> > the rating of the "SEND RELAY" in the manual is incorrect -
> > that the 2 amp rating is wrong and that the correct rating
> > is 2100 milliamps.
> >
> > What is the correct rating, please?
> >
> > Thanks for your help.
> >
> > 73...
> >
> > Duane Budd
> > [email protected]
> >
> > Duane Budd
> > [email protected]
> > Johnson City, TN
> >
> > **All outgoing Email is screened by Norton Antivirus**
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]]On
> > Behalf Of Larry Benko
> > Sent: Sunday, March 24, 2002 10:26 PM
> > To: [email protected]
> > Subject: Re: [Icom] Quick question...is there a Pro/Pro II
> > reflector?
> >
> > Steve,
> >
> > GO to Alpha......  See
> > http://www.alpha-amps.com/html/ampkey.htm
> > The answer is 25v 7mA.  Piece of cake for the ProII relay or
> > for that
> > matter any relay.
> >
> > 73,
> > Larry Benko, W0QE
> >
> > Steve Jones wrote:
> > >
> > > No Problem Adam,. I just wish I could get some simple
> > questions answered
> > > about the Icom Pro II. They are or should be black and
> > white yes or no
> > > answers..but I can't get a straight answer. One is I have
> > an Alpha 91B
> > > amplifier and with my FT1000D I can just hook up a RCA to
> > RCA male cable to
> > > key the amp. Some have said with the newer amps like mine
> > it is no
> > > problem..others say no way. There has to be a yes or no
> > answer on that
> > > question unless you are using older amps such as SB220,
> > L4B. etc. Also on
> > > the tuner matter...I have heard that if you are going to
> > tune the radio on 6
> > > meters...you should go in to the menu system and shut off
> > auto tune on band
> > > change and PTT tune. If you want to tune on 6 meter, leave
> > the tune button
> > > off and when you dial in a 6 meter frequency and want to
> > tune it, you just
> > > push and hold the tune button for manual tuning. If you
> > don't disable this
> > > feature..I have heard the relays get welded together and
> > radio has to go
> > > back to Icom. Can you give me any straight answers on
> > these two concerns.
> > > Thanks and 73, Steve, NX1G
> > >
> > > ----- Original Message -----
> > > From: "Adam Farson" <[email protected]>
> > > To: <[email protected]>
> > > Sent: Sunday, March 24, 2002 7:46 PM
> > > Subject: RE: [Icom] Quick question...is there a Pro/Pro II
> > reflector?
> > >
> > > > Hi Steve,
> > > >
> > > > My pleasure! Many thanks for the kind comments. As I no
> > longer run the
> > > Icom
> > > > Net (due to propagation and geographical
> > considerations), I try to help
> > > out
> > > > on the reflector whenever I can.
> > > >
> > > > Have you checked out the new qsl.net Icom site?
> > http://www.qsl.net/icom/
> > > >
> > > > Best 73,
> > > > Adam, VA7OJ/AB4OJ
> > > > North Vancouver, BC, Canada
> > > > http://www.qsl.net/ab4oj/
> > > > Note new e-mail address:
> > > > mailto:[email protected]
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: [email protected]
> > [mailto:[email protected]]On
> > > > Behalf Of Steve Jones
> > > > Sent: Saturday, March 23, 2002 11:52
> > > > To: [email protected]
> > > > Subject: Re: [Icom] Quick question...is there a Pro/Pro
> > II reflector?
> > > >
> > > >
> > > > Thank you for the help Adam , I appreciate it very much
> > and especially for
> > > > not sending some smart A reply. It really gets old and
> > we have a few
> > > really
> > > > tough guys behind there keyboard that enjoy sending
> > nothing but trouble
> > > > instead of help. It's simply not needed anywhere,
> > especially in Ham
> > > radio!!
> > > > 73, Steve, NX1G
> > > >
> > > > ----- Original Message -----
> > > > From: "Adam Farson" <[email protected]>
> > > > To: <[email protected]>
> > > > Sent: Saturday, March 23, 2002 1:59 PM
> > > > Subject: RE: [Icom] Quick question...is there a Pro/Pro
> > II reflector?
> > > >
> > > >
> > > > > http://groups.yahoo.com/group/ic756pro2/
> > > > >
> > > >
> > > >
> > > >
> > > > ----
> > > > Your Moderator: Dick Flanagan W6OLD,
> > [email protected]
> > > > Icom FAQ: http://www.qsl.net/icom/
> > > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD,
> > [email protected]
> > > Icom FAQ: http://www.qsl.net/icom/
> > ----
> > Your Moderator: Dick Flanagan W6OLD,
> > [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>