[Icom] Quick question...is there a Pro/Pro II reflector?

Sun, 24 Mar 2002 20:26:28 -0700

Steve,

GO to Alpha......  See http://www.alpha-amps.com/html/ampkey.htm
The answer is 25v 7mA.  Piece of cake for the ProII relay or for that
matter any relay.

73,
Larry Benko, W0QE

Steve Jones wrote:
> 
> No Problem Adam,. I just wish I could get some simple questions answered
> about the Icom Pro II. They are or should be black and white yes or no
> answers..but I can't get a straight answer. One is I have an Alpha 91B
> amplifier and with my FT1000D I can just hook up a RCA to RCA male cable to
> key the amp. Some have said with the newer amps like mine it is no
> problem..others say no way. There has to be a yes or no answer on that
> question unless you are using older amps such as SB220, L4B. etc. Also on
> the tuner matter...I have heard that if you are going to tune the radio on 6
> meters...you should go in to the menu system and shut off auto tune on band
> change and PTT tune. If you want to tune on 6 meter, leave the tune button
> off and when you dial in a 6 meter frequency and want to tune it, you just
> push and hold the tune button for manual tuning. If you don't disable this
> feature..I have heard the relays get welded together and radio has to go
> back to Icom. Can you give me any straight answers on these two concerns.
> Thanks and 73, Steve, NX1G
> 
> ----- Original Message -----
> From: "Adam Farson" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, March 24, 2002 7:46 PM
> Subject: RE: [Icom] Quick question...is there a Pro/Pro II reflector?
> 
> > Hi Steve,
> >
> > My pleasure! Many thanks for the kind comments. As I no longer run the
> Icom
> > Net (due to propagation and geographical considerations), I try to help
> out
> > on the reflector whenever I can.
> >
> > Have you checked out the new qsl.net Icom site? http://www.qsl.net/icom/
> >
> > Best 73,
> > Adam, VA7OJ/AB4OJ
> > North Vancouver, BC, Canada
> > http://www.qsl.net/ab4oj/
> > Note new e-mail address:
> > mailto:[email protected]
> >
> >
> > -----Original Message-----
> > From: [email protected] [mailto:[email protected]]On
> > Behalf Of Steve Jones
> > Sent: Saturday, March 23, 2002 11:52
> > To: [email protected]
> > Subject: Re: [Icom] Quick question...is there a Pro/Pro II reflector?
> >
> >
> > Thank you for the help Adam , I appreciate it very much and especially for
> > not sending some smart A reply. It really gets old and we have a few
> really
> > tough guys behind there keyboard that enjoy sending nothing but trouble
> > instead of help. It's simply not needed anywhere, especially in Ham
> radio!!
> > 73, Steve, NX1G
> >
> > ----- Original Message -----
> > From: "Adam Farson" <[email protected]>
> > To: <[email protected]>
> > Sent: Saturday, March 23, 2002 1:59 PM
> > Subject: RE: [Icom] Quick question...is there a Pro/Pro II reflector?
> >
> >
> > > http://groups.yahoo.com/group/ic756pro2/
> > >
> >
> >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/