[Icom] Quick question...is there a Pro/Pro II reflector now and

Sat, 23 Mar 2002 12:19:29 -0500

Paul good to hear from you. I have felt so bad that I only took the radio
out of the box yesterday and read through the manual and put it back in the
box where it is now. I hope to get it on the air this weekend as I am going
to have to completely re do my shack table before turning it on. I will let
you know. Even if I don't we could get on 40 or 75/80 meters with the
FT1000D. Let me know as I am replying to Emails now after going to bed early
last night. 73 and sorry to hear about your problem but I thought you
purchased a regular Pro??? See ya, Steve, NX1G

----- Original Message -----
From: "paul" <[email protected]>
To: <[email protected]>
Sent: Saturday, March 23, 2002 10:25 AM
Subject: Re: [Icom] Quick question...is there a Pro/Pro II reflector now and

> hey steve,,,  congratulations !!!!!  tell us about the pro2..  is it as
good
> as you anticipated?  i ran into a problem..  you wont believe this..  my
new
> 746pro...  some knucklehead at the assembly plant did not tighten the lock
> nut that holds the main vfo dial in place..  of course it is not
accessible
> !!!  back to the factory  73  paul w8jn
> ----- Original Message -----
> From: "Steve Jones" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, March 23, 2002 3:31 AM
> Subject: [Icom] Quick question...is there a Pro/Pro II reflector now and
>
>
> > if so can it be found with the rest of the reflector listings. I just
> > received a new Pro II and heard something about be careful with the
tuner
> on
> > 6 meters. Also will my Astron 35M be sufficient to power the Pro II with
> > some other small items like a lighted Daiwa watt meter. TMV7A hooked up
to
> > it as long as they are not all keyed and working at the same time. 73,
> > Steve..
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>