[Icom] Icom IC-781 Repair

Fri, 22 Mar 2002 11:26:54 -0500

Juan,
I'll have to get back to you on it later or tomorrow.  I don't have his
number here at the office.
However,
I do know that Paul is in Tucker, GA.  I got his number through information.
I don't remember if his last name is spelled Hanson or Hansen.
But they will give you the number, if not, I can try and find it for you.
73, Bruce K1XR

----- Original Message -----
From: "Juan Carlos Munoz." <[email protected]>
To: <[email protected]>
Sent: Friday, March 22, 2002 10:44 AM
Subject: RE: [Icom] Icom IC-781 Repair

> Bruce,
>
> Can you give me Paul Hanson telephone, fax and or e-mail to
> contact him about another IC-781.
>
> Thanks,
>
> Juan Carlos Munoz.
> [email protected]
>
> > -----Original Message-----
> > From: [email protected] [mailto:[email protected]]On
> > Behalf Of Bruce Marton
> > Sent: Friday, March 22, 2002 9:35 AM
> > To: [email protected]
> > Subject: Re: [Icom] Icom IC-781 Repair
> >
> >
> > Paul Hanson down in Georgia is said to be one of the best in the
business.
> > He called me back after I left a message about repairing a 781
> > and we spoke
> > for at least 30 mins. on the phone ending with a conclusion that
> > the rig did
> > not need repair.  It only required some simple alignment, which I
> > performed
> > on my own bench after Paul gave me the proper parameters to look for.
> > He did not want me to ship a 781 that really did not require anything
that
> > could not be handled by the owner!  No charge for the advice and my
notch
> > circuit is now attenuating 55 db, (and this wasn't why I was
> > calling him in
> > the first place).
> > Super nice and honest repair man.
> > 73, Bruce K1XR
> >
> >
> >
> > ----- Original Message -----
> > From: "Caitlyn Martin" <[email protected]>
> > To: <[email protected]>
> > Sent: Thursday, March 21, 2002 5:31 PM
> > Subject: Re: [Icom] Icom IC-781 Repair
> >
> >
> > > On Thu, 21 Mar 2002 16:14:54 -0600
> > > "Michael Morgan" <[email protected]> wrote:
> > >
> > > > Their website address is http://www.avvid.com/
> > > >
> > > I can definitely recommend Clif at AVVid as well.  OK, the rig I had
> > repaired there was a Kenwood, but his work was first class and
> > the price was
> > reasonable.
> > >
> > > 73,
> > > Caity
> > > KU4QD
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>