[Icom] KAM+ to PRO

Sun, 17 Mar 2002 21:35:10 +0100

Dear Luis,

The right connections are:

KAM Plus (HF Radio):                 IC-756ProII (ACC1):

Pin 5 Transmit audio (FSK) --->   Pin 1 RTTY keying

Pin 2 Ground ------------------->    Pin 5 Ground (GND)

Pin 3 Push-to-Talk ------------->   Pin 3 PTT

Pin 6 Receive audio ----------->    Pin 5 AF (AF detector output)

For AFSK you may use:

KAM Plus (HF Radio):                 IC-756ProII (ACC1):

Pin 1 Transmit audio (AFSK) -->  Pin 4 MOD (modulator input)

I suggest that you combine FSK and AFSK. So, connect Pin 5 from the KAM Plus
to Pin 1 of the ProII and connect Pin 1 from the KAM Plus to pin 4 of the
ProII. In this way you are able to use FSK and AFSK without changing cables
etc.

By the way. Pin 7 of the ProII is +13,8 Volt with a maximum of 1 A. You may
use this to power your KAM Plus.

Good luck and enjoy the combination KAM Plus with ProII!

73,
Hans Remeeus PA1HR.

e-mail: [email protected]
site: www.remeeus.nl
Ham Radio call: PA1HR

----- Original Message -----
From: "Luis Sutil Teixeira" <[email protected]>
To: <[email protected]>
Sent: Sunday, March 17, 2002 5:40 PM
Subject: [Icom] KAM+ to PRO

> Hi
> Could someone inform me what are the correct connections between KAM+,
> 8 pin socket and IC756PRO ACC(1) 8 pin socket ?? for RTTY operation.
>
> Tnx de Luis, CT4NH
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>